Boligrip wearing courses overview

Introduction

Boligrip 50 is a series of slip-resistant up to 2 mm thick floor finishing systems based on two-component, solvent-free, waterborne and low-odour synthetic resins. The systems in the series have been specially developed for application in car parks and other parking facilities. The Boligrip 50 series is used for driving lanes, parking bay areas, storage rooms, technical rooms and bike parkings. The systems in the Boligrip 50 series are vapour open, which is why they are used specifically in the lowest underground levels with ground water underneath the floors. The inert materials broadcast and incorporated into the pigmented compound have a Polished Stone Value (PSV) of at least 77, producing a non-slip and very wear-resistant finish.

The Boligrip 50 series meets the requirements for fire safety. The series is classified as Bfl-s1.

The Boligrip 50 series is available in a range of standard colours from the Bolidt Color Manager and dries to a matt finish. In addition to the standard colours, various other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 50 series can be used in both new construction and renovation projects.

The Boligrip 50 systems comply with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® 50-series

Introduction

Boligrip 200 is a series of slip-resistant up to 2 mm thick floor finishing systems based on two-component, solvent-free and low-odour synthetic resins. The systems in the series have been specially developed for application in car parks and other parking facilities. The Boligrip 200 series is used for driving lanes, parking bay areas, storage rooms, technical rooms and bike parkings. The Boligrip 200 series is used specifically on the parking levels. The inert materials broadcast and incorporated into the pigmented compound have a Polished Stone Value (PSV) of 77, producing a non-slip and very wear-resistant finish.

The Boligrip 200 series meets the requirements for fire safety. The series is classified as Bfl-s1.

The Boligrip 200 series is available in a range of standard colours from the Bolidt Color Manager and dries to a glossy finish. In addition to the standard colours, various other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 200 series can be used in both new construction and renovation projects.

The Boligrip 200 systems comply with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® 200-series

Introduction

The Boligrip 300 series is a slip-resistant, durable, flow applied, up to 2.5 mm thick floor finishing system based on low-viscosity two-component synthetic resins that are low odour. The systems in the series have been specially developed for application in car parks and other parking facilities. The Boligrip 300 series is used for driving lanes, parking bay areas, storage rooms, technical rooms and bike parkings. The inert, high PSV (Polished Stone Value) aggregates broadcast and incorporated into the pigmented compound produce a shock-proof, impact-resistant, non-slip and hard-wearing finish.

The Boligrip 300 series is available in a range of standard colours from the Bolidt Color Manager and dries to a glossy finish. In addition to the standard colours, various other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 300 series can be used in both new construction and renovation projects.

The Boligrip 300 series complies with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® 300-series
 

Introduction

Boligrip 1250 is a series of slip-resistant, up to 8 mm thick floor finishing systems based on low-viscosity two-component synthetic resins that are low odour. The systems in the series have been specially developed for application on steel and concrete bridge decks, ramps, pontoons, bus lanes, loading docks and platforms.

The materials scattered into the Boligrip 1250 compound produce a highly wear-resistant system. The systems are seamless, durable, liquid tight, low maintenance and applied on site by in-house specialists. The colour of the systems in the Boligrip 1250 series is determined by the colour of the natural aggregate. The Boligrip 1250 compound is made to match the colour of the aggregate material.

The Boligrip 1250 series is available in a range of standard colours. In addition to the standard colours, various other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 1250 series can be used in both new construction and renovation projects.

The Boligrip 1250 series complies with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

The Boligrip 1250 series carries the Kiwa product certificate based on Kiwa evaluation guideline BRL K19143.

References Boligrip^® 1250-series

Introduction

Boligrip 2000 is a series of crack-bridging and watertight floor finishing systems based on two-component, solvent-free and low-odour synthetic resins. The systems in the series have been specially developed for application on parking decks and parking levels with an increased chance of crack formation. The Boligrip 2000 series has 0.15 mm crack-bridging capacity. This applies to existing cracks as well as new cracks that may develop in the substrate after the Boligrip 2000 system has been installed. The inert materials broadcast and incorporated into the pigmented compound produce a non-slip and wear-resistant finish.

The systems in the Boligrip 2000 series have been tested to NEN 1062-7: Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties.

A watertight membrane is part of this series of systems. The membrane has been tested and approved according to EN-1928-2000 Flexible sheets for waterproofing - Bitumen, plastics and rubber sheets for waterproofing - Determination of watertightness. Method B.

The Boligrip 2000 series meets the requirements for fire safety. The series is classified as B_roof(t1).

The Boligrip 2000 series is available in a range of standard colours from the Bolidt Color Manager. In addition to the standard colours, other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 2000 series can be used in both new construction and renovation projects.

The systems in the Boligrip 2000 series comply with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® 2000-series

Introduction

Boligrip 3200 is a series of crack-bridging and watertight floor finishing systems based on two-component, solvent-free and low-odour synthetic resins. The systems in the series have been specially developed for application on parking decks and parking levels with an increased chance of crack formation. The Boligrip 3200 series has 0.35 mm crack-bridging capacity. This applies to existing cracks as well as new cracks that may develop in the substrate after the Boligrip 3200 system has been installed. The inert materials broadcast and incorporated into the pigmented compound produce a non-slip and wear-resistant finish.

The systems in the Boligrip 3200 series have been tested to NEN 1062-7: Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties.

A watertight membrane is part of this series of systems. The membrane has been tested and approved according to EN-1928-2000 Flexible sheets for waterproofing - Bitumen, plastics and rubber sheets for waterproofing - Determination of watertightness. Method B.

The Boligrip 3200 series meets the requirements for fire safety. The series is classified as Bfl-s1 and B_roof(t1).

The Boligrip 3200 series is available in a range of standard colours from the Bolidt Color Manager. In addition to the standard colours, other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 3200 series can be used in both new construction and renovation projects.

The systems in the Boligrip 3200 series comply with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® 3200-series

Introduction

Boligrip 4200 is a series of crack-bridging and watertight floor finishing systems based on two-component, solvent-free and low-odour synthetic resins. The systems in the series have been specially developed for application on parking decks and parking levels with an increased chance of crack formation. The Boligrip 4200 series has 0.55 mm crack-bridging capacity. This applies to existing cracks as well as new cracks that may develop in the substrate after the Boligrip 4200 system has been installed. The inert materials broadcast and incorporated into the pigmented compound produce a non-slip and wear-resistant finish.

The systems in the Boligrip 4200 series have been tested to NEN 1062-7: Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties.

A watertight membrane is part of this series of systems. The membrane has been tested and approved according to EN-1928-2000 Flexible sheets for waterproofing - Bitumen, plastics and rubber sheets for waterproofing - Determination of watertightness. Method B.

The Boligrip 4200 series meets the requirements for fire safety. The series is classified as B_roof(t1).

The Boligrip 4200 series is available in a range of standard colours from the Bolidt Color Manager. In addition to the standard colours, other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip 4200 series can be used in both new construction and renovation projects.

The systems in the Boligrip 4200 series comply with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® 4200-series

Introduction

Boligrip W is a series of slip-resistant, up to 8 mm thick floor finishing systems based on two-component, solvent-free and low-odour synthetic resins. The systems in the series have been specially developed for application on concrete bridge decks, bus lanes, loading docks and platforms.

The materials scattered into the Boligrip W compound produce a highly wear-resistant system. The systems are seamless, durable, liquid tight, low maintenance and applied on site by in-house specialists. The colour of the systems in the Boligrip W series is determined by the colour of the natural aggregate. The Boligrip W compound is made to match the colour of the aggregate material.

The Boligrip W series is available in a range of standard colours. In addition to the standard colours, various other colours are usually possible. Please contact us if you would like to know more about this.

The Boligrip W series can be used in both new construction and renovation projects.

The Boligrip W series complies with the norms specified in NEN-2443 Short and long term parking of passenger cars in lots and garages.

References Boligrip^® W-series

Introduction

Sorry, no information available yet.

References Bolidrain^®-series

Introduction

No information available yet.

References Bolidtop^® Z.OK-series